Best Free M4P to MP3 Converter

Transfer iTunes Library to Zune

no@spam.com (terry007) — Tue, 06 Jan 2009 07:40:53 GMT

If you have moved from Apple iPod to Microsoft Zune, you probably have some songs that you purchased from the iTunes Music Store that you would like to move to the new device. You will run into a hurdle if you try to transfer the files directly as Apple's copy protection prevents the song from playing on another device. There is a workaround to this however...

1. Create a new playlist in iTunes.

2. Add the protected songs to your playlist until you have 72 minutes of music.

3. Click the "Burn Disc" button.

4. Click the radio button next to "Audio CD" and tick "Include CD Text" option.

5. Upon completion of burning the disc, rip the songs to MP3 using Windows Media Player.

6. Open the Zune software and sync the newly created MP3's to your Zune device.

Alternatively, you can use TuneClone Audio Converter( http://www.tuneclone.com/index.php ). It automatically generates a virtual CD-ROM drive during the installation. The virtual CD drive tricks your PC into believing that you are burning a CD. Therefore, the DRM protection is removed without wasting a CD and the speed is very fast. Below are the steps:

1. Create a new playlist in iTunes.

2. Add the protected songs to your playlist. Since iTunes burns the protected music with TuneClone virtual CD drive, there is no limit as to music length so long as you have enough hard drive space.

3. Launch TuneClone. Click the "Settings" tab. In the pop-up window, you can specify output folder, output file name format, output format (Here we can choose MP3 or WMA since Zune accepts MP3 and WMA music), etc. for the output files. Note: You can check whether TuneClone virtual CD drive is successfully installed and where it is installed in the bottom left corner of the interface.

4. In iTunes, click the "Burn Disc" button.

5. In the pop-up window of "Burn Settings", select "TuneClon Virtual_CD-RW" from the "CD Burner" drop-down list, click the radio button next to "Audio CD" and tick "Include CD Text" option. Click "Burn" to start burning.

6. Upon the completion of burning the disc and encoding the music, you can open the TuneClone manager screen to show all the converted music files. To locate the output folder, simply click the "Folder" tab on the interface.

7. Open the Zune software and sync the music in the output folder to your Zune device.
Done.
Categories: ITunes to Zune, Transfer iTunes to Zune, M4P to Zune, M4P to MP3, M4P to WMA

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to transfer DRM protected iTunes M4P to BlackBerry Storm

no@spam.com (terry007) — Wed, 24 Dec 2008 07:06:19 GMT

"With a unique touch screen and cutting-edge multimedia capabilities, the BlackBerry Storm smartphone makes a great impression as you travel across town or to almost any corner of the world."

One of the great new features I am starting to enjoy on my BlackBerry Storm is the ability for it to play multimedia files and specifically audio (music).

First let's take a look at the video and audio formats supported by BlackBerry Storm:

Video format support: MPEG4 H.263, MPEG4 Part 2 Simple Profile, H.264, WMV
Audio format support: MP3, AAC, AAC+, eAAC+, WMA, WMA ProPlus

Basically, when you buy music from iTunes, it comes with a copyright protection called DRM. These DRM-protected songs are locked so that they only work with Apple MP3 players. That means that if you have a BlackBerry Storm, you cannot use iTunes music.

So, what is the solution? You have to burn a CD. When you do this, the DRM is removed (because the music is converted to a non-DRM-compatible media). After you burn the CD, you can rip it to your PC as an MP3 file which no longer has DRM.

Alternatively, you can use TuneClone http://www.tuneclone.com/index.php . TuneClone makes a virtual CD-ROM drive, tricking your PC into believing that you are burning a CD. Therefore, the DRM is removed without wasting a CD.

Here is a link to a tutorial using TuneClone and iTunes 8:
http://www.tuneclone.com/itunes8-m4p-to-mp3.php

After you get the output MP3 files, you can now begin to transfer them to your BlackBerry Storm:

1. Connect your BlackBerry to you computer via the USB cable.
2. If you have properly enabled your Blackberry as a Mass Storage Device, your Blackberry's microSD card will show as a removable drive on your computer.
3. Double click on the Blackberry folder.
4. Double click on the music folder.
5. Copy your music files to your BlackBerry.
6. Disconnect your Blackberry from the USB cable and go to the "Multimedia" icon on you Blackberry. You need to disconnect when you use the Mass Storage device method as it disables direct access from the BlackBerry when connected to the PC via the USB cable.
7. Click on the Music icon.
8. Click on the Media Card folder.
9. Select your Music folder.
10. Select your Song.
11. Play and enjoy.

Done.
Categories: ITunes, Blackberry storm, Blackberry, Itunes to blackberry, Itunes to mp3

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to remove iTunes DRM from protected AAC M4P M4B

no@spam.com (terry007) — Tue, 23 Dec 2008 06:34:42 GMT

Are you annoyed by iTunes DRM? Do you want to remove it because you want to play the iTunes music on non-Apple MP3 players like PSP, Zune, Creative Zen, BlackBerry, PS3, iriver, Walkman, mobile phone MP3 player, etc., use it as background music in a home video, or anything else that DRM limits it to do? Many people know you can remove the DRM from iTunes music by simply burning the song to a CD, and ripping it back over, losing very little quality(if settings are correct):

1. Insert a CD-R or CD-RW disc into your CD-ROM drive. You'd better use CD-RW disc as it can be used for more than once.
2. Burn your playlist to make an audio CD. You cannot select the MP3 CD option since it requires the encrypted iTunes music files be converted to unprotected MP3 files.
3. After the audio CD is successfully burned, insert the disc into your CD-ROM drive again. Then you can use iTunes to import the music tracks on the burned disc to MP3 files.

And the method I am going to introduce does the same exact thing but you will not need a CD-RW disc, a CD ROM drive, or even need to burn anything! It's that simple. Let's show you how to perform this.

We are going to be using a program called TuneClone( http://www.tuneclone.com/index.php ). TuneClone is basically a program that acts as a virtual CD drive that allows you "burn" MP3 from iTunes and "rip" it. TuneClone "lies" to your computer saying that you have a CD-RW drive that it will burn to (like Alchohol 120%). You can use this to move your library of M4P DRM protected music to the MP3 format that you can use on any player out there worth its salt. This is a useful tool for anyone looking to break their relationship with the iPod. The best part is that it maintains all of the music file's metadata. Below is the step by step tutorial that shows how it works:

1. Download TuneClone from http://www.tuneclone.com/index.php and install it.

TuneClone is fully compatible with Windows XP and Windows Vista. A virtual CD Burner will be installed. This virtual CD-RW will be used to convert music files.

2. Make settings at TuneClone

Click the Settings button at TuneClone. In the pop-up window, you can specify the output folder, output filenames, output format, etc. for the output files.

Note: Apart from MP3, TuneClone also allows you to convert iTunes M4P to WAV and unprotected WMA.
Tip: You can get the output protection removed music folder by clicking the Folder button after the whole process.

3. Make settings at iTunes(iTunes 8 )

Create a playlist, and then add the files you want to convert into the playlist.

After you have created the playlist ready to be burnt, click the Burn Disc in the bottom right of iTunes.

In the pop up window of Burn Settings, make the settings as highlighted below:

4. Start to burn

Click the Burn button to start burning.

After the burning gets started, TuneClone will automatically convert the music file to MP3, WMA or WAV. You can open the manager screen to show all the converted music files.

The most important step is to choose the CD burner. Then the software can convert the music files automatically. It is exceedingly easy when you want to batch convert lots of files.
Categories: Remove iTunes DRM, M4P, M4B, M4P to MP3, Protected AAC to MP3

[Add comment to QAIX.com] [Start blog at QAIX.com]

TuneClone V1.30 - remove DRM from iTunes M4P M4B WMA Napster using virtual CD drive

no@spam.com (terry007) — Tue, 16 Dec 2008 06:27:41 GMT

TuneClone V1.30 - remove DRM from iTunes M4P M4B WMA Napster using virtual CD drive

The newest version of TuneClone - TuneClone V1.30 - was released on December 15,2008!

http://www.tuneclone.com/index.php

TuneClone Audio Converter is a powerful yet easy to use DRM remover and music converter program for removing DRM from iTunes music, Windows Media Player music, RealPlayer music, WinAMP music, Napster music, Rhapsody music, etc., with the music metadata well preserved.

Unlike other media converters, TuneClone Audio Converter applies the virtual CD burning technology to remove the DRM. It generates a virtual CD-ROM drive, tricking your PC into believing that you are burning a CD. Therefore, the DRM is removed without wasting a CD.

TuneClone Audio Converter can be used to convert iTunes protected AAC (M4P), M4B, M4A, protected WMA to MP3, WAV and unprotected WMA. It removes the DRM from protected iTunes M4P or protected WMA so as to help you enjoy DRM-laden music on media players or MP3 players like Microsoft Zune, Sony PSP, BlackBerry, Creative Zune, iriver, SanDisk Sansa, Sony Walkman, Cell Phone(Sony Ericsson, Motorola, Nokia N-series, Samsung Anycall, LG, etc.) Pocket PC, PDA and so on.

Key features of TuneClone V1.30: http://www.tuneclone.com/index.php

1. Easy to install and easy to use via a simple user interface.

2. Remove DRM from purchased or protected music from iTunes, Windows Media Player, RealPlayer, WinAMP, Napster, Rhapster, etc, using automatically generated virtual CD drive.

3. Convert DRM protected music to plain MP3 format for playback on all kinds of MP3 players or media players like Zune, PSP, BlackBerry, Creative Zen, iriver, Walkman, etc.

4. Remove DRM from purchased music files by applying the virtual CD burning technology, which adopts the maximum writing speed so that your music files can be converted at a very high speed.

5. Convert iTunes protected AAC (M4P), M4B and M4A to MP3, WAV and WMA.

6. Convert protected WMA (Windows Media Audio) to MP3, WAV and unprotected WMA.

7. Well Preserve ID3 tags for artist, album, title names, artworks, etc.

8. The converted songs will have no DRM restriction any more.

Availability, price and support

More information about TuneClone V1.30 is available at http://www.tuneclone.com/index.php . You can free download TuneClone V1.30 from http://www.tuneclone.com/tuneclone_setup.exe for a try. The full version of TuneClone V1.30 costs USD 34.95.

If you have questions about or show interest in TuneClone V1.30, please feel free to contact TuneClone support team via support@tuneclone.com.
Categories: Remove DRM, Remove iTunes DRM, M4P to MP3, WMA to MP3, DRM removal

[Add comment to QAIX.com] [Start blog at QAIX.com]

Remove DRM from iTunes with TuneClone virtual CD burner

no@spam.com (terry007) — Tue, 09 Dec 2008 02:28:25 GMT

Basically, when you buy music from iTunes, it comes with a copyright protection called DRM. These DRM-protected songs are locked so that they only work with Apple MP3 players. That means that if you bought a Microsoft Zune, you cannot use iTunes music.

So, what is the solution? You have to burn a CD. When you do this, the DRM is removed (because the music is converted to a non-DRM-compatible media). After you burn the CD, you can rip it to your PC as an MP3 file which no longer has DRM.

Alternatively, you can use TuneClone ( http://www.tuneclone.com/index.php ).

TuneClone makes a virtual CD-ROM drive, tricking your PC into believing that you are burning a CD. Therefore, the DRM is removed without wasting a CD.

Here is a link to a tutorial using TuneClone and iTunes 8:
http://itunesm4ptomp3.wordpress.com/2008/09/16/convert-itunes8-music-to-mp3/
Categories: Remove iTunes DRM, ITunes 8, Burn CD, Remove DRM, ITunes remove DRM

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to convert Rhapsody to iTunes for iPod iPhone

no@spam.com (terry007) — Fri, 05 Dec 2008 05:34:44 GMT

Music purchased from Rhapsody is under DRM protection, which stops customers from playing the downloaded music with other incompatible devices like Apple iPod and Microsoft Zune. If you don't continue to pay, you won't keep the music when the subscription expires. As we all know, iPod is one of the most popular and successful MP3 players. iPod owners can purchase various music songs from iTunes Store and listen to them with their iPods. However, if you prefer Rhapsody and find some songs in Rhapsody that are unavailable in iTunes store, yet you do want to enjoy these songs witn your new iPod, you are meeting the headache of Naspter being incompatible with iPod. So the following tutorial should be the solution.

The tools you will need:

TuneClone Audio Converter http://www.tuneclone.com/index.php
Rhapsody Software
iPod
iTunes Library

1. Make settings in TuneClone Audio Converter

Download TuneClone (fully compatible with Windows XP and Windows Vista) from http://www.tuneclone.com/tuneclone_setup.exe and install it. After launching TuneClone, click the "Settings" button. In the pop-up dialog of "Options", you can specify the "Output Folder", "Output Filenames", "Output Format" (here we choose MP3), etc. for the output files.

Tip: You can get the output protection removed MP3 music folder by clicking the "Folder" button after the whole process.

2. Create a new playlist in Rhapsody

In the center left panel of Rhapsody, navigate to "Playlist". Then in the bottom left corner, click "New" to create a new playlist.

Click "File" and select "New Playlist" to create a new playlist in Rhapsody.

Drag and drop the music you are ready to burn to the new playlist from Rhapsody Library.

3. Make CD burning settings in Rhapsody

Click "Tools" and select "Preference..." from the drop-down list. Click "CD Burning" from the list in the left panel. In the "CD Burner Options", choose TuneClone virtual CD drive as preferred CD burner.

4. Start to burn

Click the "Burn CD" button to start the burning and encoding process.

After the burning gets started, TuneClone will automatically convert the music file to MP3. You can open the manager screen to show all the converted music files.

The most important step is to choose the CD burner. Then the software can convert the music files automatically. It is exceedingly easy when you want to batch convert lots of files.

After you get the output MP3 files converted from the Rhapsody music playlist in your Rhapsody, you can now begin to transfer the MP3 files to your iPod with the sync of iTunes.
Categories: Remove drm, Remove drm rhapsody, Rhapsody, Rhapsody remove drm, Rhapsody to ipod, Rhapsody to itunes

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to transfer Napster music playlist to iTunes playlist for iPod

no@spam.com (terry007) — Tue, 02 Dec 2008 02:38:00 GMT

Music purchased from Napster is under DRM protection, which stops customers from playing the downloaded music with other incompatible devices like Apple iPod and Microsoft Zune. If you don't continue to pay, you won't keep the music when the subscription expires. As we all know, iPod is one of the most popular and successful MP3 players. iPod owners can purchase various music songs from iTunes Store and listen to them with their iPods. However, if you prefer Napster and find some songs in Napster that are unavailable in iTunes store, yet you do want to enjoy these songs witn your new iPod, you are meeting the headache of Naspter being incompatible with iPod. So the following tutorial should be the solution.

The tools you will need:

TuneClone Audio Converter http://www.tuneclone.com/index.php
Napster Software
iPod
iTunes Library

1. Make settings in TuneClone Audio Converter

Download TuneClone (fully compatible with Windows XP and Windows Vista) from http://www.tuneclone.com/tuneclone_setup.exe and install it. After launching TuneClone, click the "Settings" button. In the pop-up dialog of "Options", you can specify the "Output Folder", "Output Filenames", "Output Format" (here we choose MP3), etc. for the output files.

Tip: You can get the output protection removed MP3 music folder by clicking the "Folder" button after the whole process.

2. Create a new playlist in Napster

Under "My Playlist", click the "New Playlist" button to create a new playlist. Drag and drop to the playlist the music you are going to burn from your Napster Library.

3. Make CD burning settings in Napster

Click "Tools", and select "Preference..." from the drop-down list. In the left panel of "Options", navigate to "CD Options". In the right panel of "CD Options", choose TuneClone virtual CD drive as the preferred CD burner.

Note: Please tick "Burn CD Text" to preserve the metadata of the music.

4. Start to burn

Click the "Burn Disk" button to start the burning and encoding process.

After the burning gets started, TuneClone will automatically convert the music file to MP3. You can open the manager screen to show all the converted music files.

The most important step is to choose the CD burner. Then the software can convert the music files automatically. It is exceedingly easy when you want to batch convert lots of files.

After you get the output MP3 files converted from the Napster music playlist in your Napster, you can now begin to transfer the MP3 files to your iPod with the sync of iTunes.
Categories: Napster, ITunes, DRM, DRM Napster, Napster to iPod, Napster to iTunes, ITunes 8 Napster, Remove DRM

[Add comment to QAIX.com] [Start blog at QAIX.com]

Review on TuneClone Audio Converter

no@spam.com (terry007) — Mon, 24 Nov 2008 06:09:35 GMT

There is an in-depth review of TuneClone Audio Converter software[http://www.tuneclone.com/index.php ]. The author gives an average score of 4.5 out of 5.

So what do you think of this review? Is it fair and honest? Now let's take a look at the highlights of this review:

iTunes has invaded pretty much all musical use on the computer anymore, people who don't really know much about computers hear about iTunes and assume that's what they're supposed to use for their music on their computers. Case in point, a friend of mine does not own an iPod, but yet he and his girlfriend used iTunes to transfer all of his music over to his computer and it's kinda stuck there now. Well he'll be the first to admit that he really doesn't know much about computers at all, so seeing as iTunes was so popular that's what they decided to use for his music, of course they didn't ask me anything at all. They transferred over many, many songs, and of course his mp3 player, a Sandisk, can't play them so he was stuck with what to do next. So he called me for help, mind you though, most of his music isn't copy protected/copy righted etc, he's actually a world renowned Waltz or Ballroom Dance instructor, so he's got tons of music he uses for that kind of stuff, and once they spent the hours to put it in his computer via iTunes he was basically stuck, it was either re-do it all through another program, buy an iPod or figure out another way to get his music to his Sandisk player converted to Mp3 format.

So there are a few free versions out there that will help my friend out, but I needed something that was easy to use, very easy to use and I found TuneClone, which is very easy to use so that's what I've got for review today. TuneClone is a program to convert you iTunes or other music services music over to mp3 format, quickly and easily. It essentially creates a virtual CDRW drive on your computer and virtually burns the CD from the main program, iTunes of other and then TuneClone automatically rips it to mp3 format for you, so in a few easy steps you've got music that is easily transferred and played on any device.

Tech Specs, Features or the Basic Info:

Note: The information in this part is from TuneClone homepage, so please go to http://www.tuneclone.com/index.php to get to know about tech specs, features and basic info of TuneClone Audio Converter.

Installation, Testing and Comparison:

TuneClone is a download, so there are no box shots etc, just download and install, very easy to do.

There's really not much to do on the end user part of this program, most is done automatically. Load up TuneClone and hit the 'Open Media Player' button and your iTunes or whatever will open for you. If you wish you can change the output directory, and other settings like bitrates etc, but for most the default settings are fine.

To use TuneClone you just burn a CD with your program, I'm using iTunes of course, you just have to make sure the destination drive is the TuneClone virtual CD, other than that there's nothing else to change really.

As soon as you hit burn, your CD will start to burn virtually and then TuneClone goes to work converting the files to MP3 format for you automatically.

That's it, there's really nothing much more to it, very easy to use for even someone who doesn't know much about computers.

Summary and Comments:

TuneClone is a great way to free your music from one of the music services out there, it works well, it works fast and it's very easy to use.

DragonSteelMods gives TuneClone Audio Converter Software a 4.5 out of 5 score.

Pros:

-Easy use
-Fast
-Works well

Cons:

-Expensive

The full review is available at http://www.dragonsteelmods.com/index.php?option=com_content&task=view&id=10186&Itemid=38
Categories: Audio converter, Convert m4p, Itunes to mp3, Review, Review on tuneclone, Tuneclone review

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to rip DVD movie, convert video and convert YouTube video to PSP

no@spam.com (terry007) — Tue, 18 Nov 2008 06:34:18 GMT

It is no doubt that PSP is an excellent game player. However, it is not playing games all the time; you can use it to do a ton of other cool and (highly useful) things when you're not in the game mode. Thanks to its pretty big screen compared to other portable video players, PSP is a nice gadget for watching videos as well. So the following tutorial focuses on how to rip DVD movies and TV shows, convert video files and convert online YouTube/Google videos to MP4 format for playback on Sony PSP.

The only tool you need is Clone2Go DVD to PSP Converter:

http://www.clone2go.com/products/dvdtopsp.php

Unlike other DVD to PSP converter programs, this DVD to PSP converter combines the following main features into one program:

Rip DVD to PSP

Convert video to PSP

Download online YouTube/Google video

Convert downloaded YouTube/Google videos or local FLV videos to PSP

Note: Clone2Go DVD to PSP Converter is not free. It does cost USD29.95 to register the full version. And there are numerous DVD ripper and video converter programs that can convert DVD's and videos to PSP compatible video formats. However, if you want to avoid the trouble of finding so many free programs and don't mind paying a small sum of money, the all-in-one Clone2Go DVD to PSP Converter would be the best choice for you.

First, let's take a look at the main interface of Clone2Go DVD to PSP Converter.

And below are the highlights of how to use Clone2Go DVD to PSP Converter.

1. Add DVD movies or TV shows

Insert the DVD disc into the disc drive, click the Open DVD button to import it if you are going to enjoy the DVD movie on your PSP. Or if the DVD movie is saved as a folder on your computer, you need to click the Add Video button to locate that folder, which is composed of two separate folders: VIDEO_TS and AUDIO_TS. From the VIDEO_TS folder, select the .vob file to import and then click OK.

2. Import video files

You can also import videos stored on your PC by clicking the Add Video button and then click OK. The supporting formats are shown as follows:

3. Download YouTube or Google videos

If you want to enjoy online YouTube or Google videos on your PSP, click the YouTube button on the main interface. In the pop-up window, copy and paste the URLs of the YouTube/Google videos one by one.

There will be a list of the added YouTube/Google videos, which will be downloaded automatically one by one. And the downloading status is clearly shown on the list. After the status of all of them indicates Completed, you can tick whichever videos you want to watch on your PSP.

After the DVD's, videos or YouTube/Google videos are imported, you can preview it on the main interface. If you only want a clip of the DVD/video, you can drag the Start to trim and Stop to trim button to get the certain segment.

4. Choose a proper profile

From the drop-down list of Profile, you can select the most appropriate profile:

Now you can click the Start Encode button to starting ripping DVD movies or TV shows, converting videos or converting YouTube/Google videos for your PSP.

5. Transfer videos to PSP

Since it is very complicated to transfer videos from PC to PSP. Here, I'd like to introduce a totally freeware called PSP Video Manager. You can download it to help you directly transfer videos to PSP or export PSP MPEG-4 videos located in your PSP to your PC without manually renaming PSP MPEG-4 files.
Categories: Rip DVD, DVD to PSP, PSP video, PSP movie, YouTube to PSP, Rip DVD to PSP, PSP video manager

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to transfer WMAs and iTunes 8 library from Windows to Mac

no@spam.com (terry007) — Fri, 07 Nov 2008 07:56:46 GMT

"My laptop HDD recently failed, so I replaced it with an iMac. Fortunately, my iTunes library was on an external HDD, so I have copied it across to the iMac. However, the songs that I have purchased from iTunes do not seem to be available. They have copied across, but are 'greyed out'. I have authorised my new computer to play purchases. Is there anything else I am forgetting?"

It is relatively painless to switch over from Windows to Mac as Mac has support for a lot of commonly used files like Microsoft Word documents, Powerpoint slideshows and Adobe PDF files. So, compatibility is hardly an issue. What you do have to take note of however while switching over to Mac are your iTunes library and WMAs. Note: This tutorial was written under the assumption that you are running the latest version of iTunes ( iTunes 8 ) on both your Windows and Mac.

1. Add WMAs to iTunes on Windows

iTunes for Windows is built with Windows Media Audio (WMA) support - it is able to play and convert WMAs. However, because WMA is a proprietary codec, it isn't available in iTunes for Mac. If you're not careful, you'll be left with a lot of WMAs which will be unplayable on your Mac.

The easiest way to dodge this problem is to convert all the WMAs you have while you're still on your Windows machine. In your iTunes General preferences, under 'Import settings', make sure to have AAC or MP3 selected. Configure the bit rate if you like but because you will be converting from one lossy codec to another, there's bound to be a profound loss in quality.

However, if the WMAs are DRM protected, it will be a little bit difficult. One method of dealing with the DRM protected WMAs is to get an audio converter. Make a simple Google search and you will get a lot of converters that can convert WMA to MP3. However, those that can convert DRM protected WMA to MP3 are rather limited. The one that attracts my attention is TuneClone Audio Converter http://www.tuneclone.com/index.php (fow Windows only), which isn't free but very well worth a shot if you have lots of DRM protected WMAs ready to be switched to Mac. TuneClone Audio Converter is capable of removing DRM protection from WMA files and convert WMA to iTunes (both Windows and Mac) compatible MP3 format by installing a virtual CD burner. Here is the guide: http://www.tuneclone.com/how-to-convert-wma-to-mp3-for-ipod.php

Apart from that, TuneClone Audio Converter can also be used to convert iTunes M4P (protected AAC) to MP3 for non-Apple MP3 devices. Here is the guide: http://www.tuneclone.com/itunes8-m4p-to-mp3.php

After getting the protected WMAs converted to MP3, add to your iTunes library the MP3 files, which will be transferred to Mac along with all the music in iTunes library.

2. Backup iTunes library on Windows

In Windows, open iTunes. Consolidate your library from the 'File -> Library' menu.

This will move all the music files into the iTunes Music folder and sort them by artist and album.

Navigate to your My Music folder. It's typically found at C:\Documents and Settings\~username~\My Documents\My Music.

Copy the iTunes folder to the Desktop of your new Mac. Depending on the size of your library and the method of transfer, this could take a while.

3. Organize iTunes on Mac

If you are running iTunes on your Mac for the first time, you'll be prompted with the initial welcome setup procedure. When it asks to search your drive for music files, make sure to decline. At the end, you'll be presented with a fresh, empty iTunes library. Now, quit iTunes. By default, it would have already set up its own iTunes Music folder located in ~/Music. Go over to this location and delete the iTunes folder then copy and paste your iTunes Music folder from the desktop into it (the one which you have just brought over from your Windows computer). After all this is done, launch iTunes and you'll be rewarded with your old, personalized iTunes library.
Categories: WMA, ITunes 8, ITunes for Windows, ITunes for Mac, WMA to MP3, Protected WMA to MP3, DRM

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to play iTunes protected AAC (M4P) music on PS3?

no@spam.com (terry007) — Mon, 03 Nov 2008 06:12:25 GMT

"Can I play iTunes (that I have stored on my computer) on my PS3? I know I can't just hook up my iPod to it or stream from my PC. I read something about transferring music to USB and then put that flash drive in the PS3, will this work? I want to play my iTunes on my home theater but I have no other way than to play it through my PS3. I have a yamaha 5990 receiver and it is not iPod compatible. Any options here? Thanks in advance."

As the music in iTunes is encrypted with DRM, you cannot directly transfer it to your PS3. The easiest way is to burn the music to an audio CD and then rip it back to Windows Media Player or a similar program as an MP3.

Or you can get some software to help you. TuneClone is a pretty good program to get the iTunes protected AAC (M4P) music burned to MP3.

And this page demonstrates how to remove DRM from iTunes music and convert iTunes DRM protected AAC (M4P) music to MP3 for Sony PlayStation 3(PS3) using these two methods:

1. Burn an audio CD and rip it back to MP3
2. TuneClone

And below is the tutorial page:
http://www.tuneclone.com/how-to-import-itunes-music-to-playstation3.php

So now you can listen to iTunes music while playing games with your PS3.
Categories: Itunes 8, Sony, PS3, Apple, Itunes to ps3, M4p to mp3

[Add comment to QAIX.com] [Start blog at QAIX.com]

DIY: create free ringtones for iPhone 3G using iTunes

no@spam.com (terry007) — Thu, 30 Oct 2008 02:10:14 GMT

It is very easy to create free ringtones for your iPhone 3G using only iTunes and songs you already have on your computer. This tutorial shows how to perform step by step. It only works with songs that are DRM free. To create ringtones using DRM protected songs, you need first strip the DRM off and then follow the guide. This method has been tested and works with iTunes 7.7.1 and iPhone 2.0.1 firmware. Actually, my friend told me he had tested it with iTunes 8 and it worked smoothly as well, though there were several differences in making settings due to the update of iTunes.

And here is the tutorial: http://www.tuneclone.com/how-to-free-custom-ringtones-for-iphone-3g.php
Categories: Iphone 3g, Itunes, Itunes 8, Ringtones, Ringtones for iphone, Free ringtones, Free iphone ringtones

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to convert protected WMA to MP3 for iPod

no@spam.com (terry007) — Wed, 15 Oct 2008 05:58:39 GMT

"The majority of my albums are in my Windows Media Player and I would like to transfer those albums to my iPod. Now I don't know how to. All I know is that WMA is not compatible with Apple iPod. So how do I rescue my songs? I tried to use limewire to download free music but it is a mess."
If you meet the same problem, you got the right place! The following tutorial details how to put both protected and unprotected WMA (Windows Media Audio) music files to iPod.

If the WMA files you are going to play on your iPod is unprotected, you just select and drag them into iTunes Library and they should be automatically converted to whatever iPod format you selected in iTunes preferences for importing.

If they are WMA files protected by DRM, it is not that easy. You need to use some software to strip the DRM off your WMA files and then convert the WMA files to the much more widely-supported MP3 format.
Note: As with any transcoding, the quality will go down. But if you've got a lot of protected WMA files you'd like to get on your iPod, this solution would do the trick.

In this tutorial, I'd like to show how to remove DRM from WMA files and convert the WMA files to MP3 format using TuneClone Audio Converter(http://www.tuneclone.com/index.php ). Let�s take a look at how it performs:

1. Settings at TuneClone

Download TuneClone (fully compatible with Windows XP and Windows Vista) and install it. After launching TuneClone, click the Settings button. In the pop-up dialog of Options, you can specify the Output Folder, Output Filenames, Output Format (here we choose MP3), etc. for the output files.
Tip: You can get the output protection removed MP3 music folder by clicking the Folder button after the whole process.

2. Burning at Windows Media Player(WMP 11)

Create a new playlist and drag into it the WMA files you are going to enjoy on your iPod. After that, click the Burn button and select Audio CD from the drop-down list. On the right panel of CD Drive, click Next Drive to locate the CD drive to TuneClone's Virtual CD Burner.

Note: If you are unsure whether TuneClone's Virtual CD burner is successfully installed or where it is installed, please refer to the bottom left corner of TuneClone:

Then, drag the playlist you created just now to the Burn List and click the Start Burn button to start burning the playlist. While the burning gets started, TuneClone will automatically convert the WMA playlist to MP3 files. You can open the manager screen to show all the converted music files.
Note: If you get the output files formatted as 01-1.mp3, 01-2.mp3, etc., please click the output MP3 songs in the manager screen and drag the counterpart original WMA songs to the Track Info panel of TuneClone one by one. The information about the artist, album, title, etc. will be changed accordingly. It would be a time-consuming process if you are burning a big collection of music. However, since Windows Media Player 11 doesn't support CD-text burning, this seems to be the only way to get the information back.

After you get the output MP3 files converted from the WMA playlist in your Windows Media Player, you can now begin to transfer the MP3 files to your iPod with the sync of iTunes.
Categories: Wma to mp3, Windows media player, Wma to ipod, Drm wma to mp3, Convert wma to mp3, Wma to mp3 for ip

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to burn DRM encrypted iTunes 8 music to MP3

no@spam.com (terry007) — Thu, 09 Oct 2008 05:56:22 GMT

Are you annoyed by iTunes DRM? Do you want to strip it off because you want to play the iTunes music on other mobile devices other than iPod and iPhone, use it as background music in a home video, or anything else that DRM limits it to do? Many people know you can strip off the DRM off iTunes music by simply burning the song to a CD, and ripping it back over, losing very little quality(if settings are correct):

1. Insert a CD-R or CD-RW disc into your CD-ROM drive. You'd better use CD-RW disc as it can be used for more than once.
2. Burn your playlist to make an audio CD. You cannot select the MP3 CD option since it requires the encrypted iTunes music files be converted to unprotected MP3 files.
3. After the audio CD is successfully burned, insert the disc into your CD-ROM drive again. Then you can use iTunes to import the music tracks on the burned disc to MP3 files.

And the method I am going to introduce does the same exact thing but you will not need a CD-RW disc, a CD ROM drive, or even need to burn anything! It's that simple. Let's show you how to perform this.

We are going to be using a program called TuneClone(http://www.tuneclone.com ). TuneClone is basically a program that acts as a virtual CD drive that allows you "burn" MP3 from iTunes and "rip" it. TuneClone "lies" to your computer saying that you have a CD-RW drive that it will burn to (like Alchohol 120%). You can use this to move your library of M4P DRM protected music to the MP3 format that you can use on any player out there worth its salt. This is a useful tool for anyone looking to break their relationship with the iPod. The best part is that it maintains all of the music file's metadata. Below is the step by step tutorial that shows how it works:

1. Download TuneClone from http://www.tuneclone.com and install it.

TuneClone is fully compatible with Windows XP and Windows Vista. A virtual CD Burner will be installed. This virtual CD-RW will be used to convert music files.

2. Make settings at TuneClone

Click the Settings button at TuneClone. In the pop-up window, you can specify the output folder, output filenames, output format, etc. for the output files.

Note: Apart from MP3, TuneClone also allows you to convert iTunes M4P to WAV and unprotected WMA.
Tip: You can get the output protection removed music folder by clicking the Folder button after the whole process.

3. Make settings at iTunes(iTunes 8 )

Create a playlist, and then add the files you want to convert into the playlist.

After you have created the playlist ready to be burnt, click the Burn Disc in the bottom right of iTunes.

In the pop up window of Burn Settings, make the settings as highlighted below:

4. Start to burn

Click the Burn button to start burning.

After the burning gets started, TuneClone will automatically convert the music file to MP3, WMA or WAV. You can open the manager screen to show all the converted music files.

The most important step is to choose the CD burner. Then the software can convert the music files automatically. It is exceedingly easy when you want to batch convert lots of files.
Categories: Remove DRM, ITunes 8, ITunes to MP3, Burn iTunes, Burn CD

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to import iTunes M4P music to Windows Movie Maker

no@spam.com (terry007) — Tue, 07 Oct 2008 03:43:50 GMT

Many people are fond of making slideshows on their Windows Movie Maker, however, it won't let them import any purchased music as it is DRM protected. Since iTunes store tops the music retailer in the world, the following tutorial focuses on how to convert purchased iTunes M4P music to MP3, WAV or unprotected WMA so as to import it to Windows Movie Maker project as background music. The tutorial is composed of the following three parts:

Part 1. Something about Windows Movie Maker

Windows Movie Maker is a totally free program that comes with Windows XP Home Edition, Windows XP Media Center Edition, Windows XP Professional, and Windows Vista. Below are the audio/video formats accepted by Windows Movie Maker:

Video files: .asf, .avi, .wmv
Movie files: MPEG1, .mpeg, .mpg, .mlv, .mp2
Audio files: .wav, .snd, .au, .aif, .aifc, .aiff
Windows media files: .asf, .wm, .wma, .wmv
MP3 format audio: .mp3

Part 2. Remove DRM from iTunes M4P music

The songs you purchased from iTunes store are under DRM protection. You cannot directly import them to your Windows Movie Maker project. However you can burn the protected music files to CD-R or CD-RW disc to make an audio CD and then use some CD ripper software to convert the audio CD track back to MP3, WAV, WMA, etc. And iTunes allows you to burn the protected music files to CD-R or CD-RW disc to make a standard audio CD:

1. Insert a CD-R or CD-RW disc into your CD-ROM drive. You'd better use CD-RW disc as it can be used for more than once.
2. Burn your playlist to make an audio CD. You cannot select the MP3 CD option since it requires the protected music files be converted to unprotected MP3 files.
3. After the audio CD is successfully burned, insert the disc into your CD-ROM drive again. Then you can use iTunes to import the music tracks on the burned disc to MP3 files.

The steps are very simple indeed. Yet, I'd like to introduce a practical application called TuneClone M4P to MP3 Converter(http://www.tuneclone.com ). It applies the virtual CD burning technology so that there is no need to use real disc. You can use it to move your library of M4P DRM protected music to the MP3 format that you can use on any player out there worth its salt. This is a useful tool for anyone looking to break their relationship with the iPod. The best part is that it maintains all of the music file's metadata. You can learn how to remove DRM from iTunes M4P music with TuneClone M4P to MP3 Converter from this guide(http://itunesm4ptomp3.wordpress.com/2008/07/04/how-to-convert-itunes-m4p-to-mp3-with-tuneclone/ ).

Part 3. Add the output DRM-free music to Windows Movie Maker

After you get the output DRM-free music by adopting either the disc burning/ripping method or virtual CD burning method discussed in Part 2, now you can begin to import it into your Windows Movie Maker project.

Click on File. Then click on Import. A window will appear. In the window, navigate to the sound or music file you want to add to your movie. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "collections". Click on the icon and drag it on to the timeline to the part of the video you want the sound or music to play.

[Add comment to QAIX.com] [Start blog at QAIX.com]

Updated: How to convert iTunes protected AAC(M4P) to MP3(using iTunes 8)

no@spam.com (terry007) — Sat, 27 Sep 2008 06:35:32 GMT

More than two months ago, I wrote a tutorial entitled How to Convert iTunes M4P to MP3(http://m4ptomp3.qaix.com/0-395-how-to-strip-drm-off-itunes-m4p-music-to-mp3-wma.zhtml). In that post, I introduced two ways to convert iTunes M4P(protected AAC) music to MP3: burning and ripping CD disc and using TuneClone(http://www.tuneclone.com). With the release of Apple genius iTunes 8, the second method of converting iTunes M4P(protected AAC) music to MP3 with TuneClone isn't applicable, as there's some difference between iTunes 8 and its previous version. So, I'd like to post the step by step tutorial about how to convert iTunes 8 protected AAC or say M4P music to MP3 with TuneClone below:

1. Download TuneClone and install it.

TuneClone is fully compatible with Windows XP and Windows Vista. A virtual CD Burner will be installed. This virtual CD-RW will be used to convert music files.

2. Make settings at TuneClone

Click the Settings button at TuneClone. In the pop-up window, you can specify the output folder, output filenames, output format, etc. for the output files.

Note: Apart from MP3, TuneClone also allows you to convert iTunes M4P to WAV and unprotected WMA.
Tip: You can get the output protection removed music folder by clicking the Folder button after the whole process.

3. Make settings at iTunes

Create a playlist, and then add the files you want to convert into the playlist.

After you have created the playlist ready to be burnt, click the Burn Disc in the bottom right of iTunes.

In the pop up window of Burn Settings, make the settings as highlighted below:

4. Start to burn

Click the Burn button to start burning.

After the burning gets started, TuneClone will automatically convert the music file to MP3, WMA or WAV. You can open the manager screen to show all the converted music files.

The most important step is to choose the CD burner. Then the software can convert the music files automatically. It is exceedingly easy when you want to batch convert lots of files.
Categories: Apple, ITunes 8, M4p to mp3, Itunes to mp3, M4p converter, AAC to MP3

[Add comment to QAIX.com] [Start blog at QAIX.com]

Ways to remove DRM from iTunes music on Windows and Mac

no@spam.com (terry007) — Tue, 16 Sep 2008 06:43:21 GMT

There are many ways to remove DRM protection from iTunes music. On Windows OS, you can remove the DRM from iTunes music using the burn-and-rip method or you can turn to programs like TuneClone(http://www.tuneclone.com ) and DoubleTwist(http://www.doubletwist.com/). On Mac OS X, iMovie is the perfect solution to removing DRM from iTunes music. Besides, freewares like FairGame is also a pretty good choice. So this article is dedicated to introducing several methods of removing the nasty DRM from iTunes music on Windows and Mac OS X. It is divided into the following four parts:

Part 1. Remove DRM from iTunes music on Windows with burn-and-rip method

A. Insert a CD-R or CD-RW disc into your CD-ROM drive. You�d better use CD-RW disc as it can be used for more than once.
B. Burn your playlist to make an audio CD. You cannot select the MP3 CD option since it requires the protected music files be converted to unprotected MP3 files.
C. After the audio CD is successfully burned, insert the disc into your CD-ROM drive again. Then you can use iTunes to import the music tracks on the burned disc to MP3 files.

Part 2. Remove DRM from iTunes music on Windows with TuneClone

A. Download TuneClone from http://www.tuneclone.com/tuneclone_setup.exe and install it.

It is fully compatible with Windows XP and Vista. A virtual CD Burner will be installed. This virtual CD-RW will be used to convert music files.

B. Set the default CD Burner to TuneClon CD-RW at iTunes.

Click menu Edit, select menu item Preferences..., and then select Advanced Tab. In order to keep the artist and title information of the music, the Include CD Text option should be checked.

C. Create a playlist, and then add the files you want to convert into the playlist.

D. Click Burn Disc button at the bottom right of the main screen of iTunes.

While the burning gets started, TuneClone will automatically convert the music file to MP3, WMA or WAV. You can open the manager screen to show all the converted music files.

The most important step is to choose the cd burner. Then the software can convert the music files automatically. It is exceedingly easy when you want to batch convert lots of files.

Part 3. Remove DRM from iTunes music on Mac OS X with iMovie

In the iMovie window, select the 'Media' tab located between 'Themes' and 'Editing'. You will notice that the top right portion of the interface now offers a media browser. Select the 'Audio' tab and locate the playlist which contains purchased music, or search by artist/title.

Select the DRM-laden song and drag the file from the media browser into the iMovie timeline where it says "Drag audio here to build your project."

In order to export the song, iMovie requires that a visual image be associated with the audio track - iMovie thinks that it is going to be exporting a movie. Simply drag a blank image (or any other image) to the track above the previously imported audio file. Once iMovie has processed the image, select the 'Share�' sub menu item from found inside 'Share' in iMovie's menu bar.

Ensure that 'Expert Settings' is selected in the "Compress movie for:" drop-down menu. Selecting 'Expert Settings' mode will provide the options to export the file as an audio file. Select the 'Share' button.

In the Save as� dialogue, select "Sound to AIFF" in the Export drop-down menu, Choose an appropriate directory for iMovie to export to, title the file, and select 'Save'. Depending on your machine configuration, iMovie will compress and export the movie project as an audio file in 15-40 seconds.

Locate the exported AIFF audio file and drag to your iTunes Library. Right-click on the file and select "Convert Selection to AAC". Once completed, 'Get Info' on the new file, edit meta data, add album art, and trash the originally purchased and AIFF audio files from your iTunes library.

Part 4. Remove DRM from iTunes music on Mac OS X with FairGame

FairGame is freeware to remove DRM protection from iTunes music on Mac OS X. It will convert the DRMed songs you bought on the iTunes Store to an unprotected format (using iTunes default encoder) and keep all the original metadata, lyrics and artwork. FairGame doesn't do lossless DRM stripping. It re-encodes protected AAC files purchased in iTMS into unprotected AAC file using Apple's iMovie software.

What you MUST DO (only once) to get FairGame to work:

Enable "Access for assistive devices" in the "Universal Access" system preference
Select "Place clip in Movie Timeline" in the "Import" preference of iMovie HD

Then you can simply:

Select some songs in iTunes
Click on the "Process songs" button

Don't touch anything and wait until it's done...(FairGame is scripting iMovie's interface to process the songs, don't interfere)

[Add comment to QAIX.com] [Start blog at QAIX.com]

TuneClone V1.20 free download

no@spam.com (terry007) — Mon, 08 Sep 2008 05:31:29 GMT

TuneClone V1.20(http://www.tuneclone.com ) was released on September 3, 2008!

TuneClone V1.20 is a powerful DRM cracker and music converter for unlocking iTunes DRMed M4P music and protected WMA music and converting M4P, M4A, M4B, WMA to MP3, WAV and unprotected WMA.

TuneClone V1.20 allows you to remove DRM protection from purchased music files by applying the awesome virtual CD burning technology. It strips the DRM from protected iTunes M4P or protected WMA so as to help you enjoy DRM-laden music on media players or MP3 players like Microsoft Zune, Sony PSP, BlackBerry, Creative Zune, iriver, SanDisk Sansa, Sony Walkman, Cell Phone(Sony Ericsson, Motorola, Nokia N-series, Samsung Anycall, LG, etc.) Pocket PC, PDA and so on.

TuneClone V1.20 also lets you virtually burn all kinds of music files with media player software like iTunes, Windows Media Player, RealPlayer, WinAMP, etc.

Key features of TuneClone V1.20: http://www.tuneclone.com

1. TuneClone V1.20 is easy to install and easy to use via a simple user interface.

2. TuneClone V1.20 converts DRM protected music and movie files and various audio/video files to MP3, Wav and unprotected WMA at very high speed with very nice CD quality.

3. TuneClone V1.20 easily and quickly removes DRM from purchased music files by applying the virtual CD burning technology. Compared with using real CD-R or CD-RW disc, TuneClone's virtual CD burning can use the maximum writing speed so that your music files can be converted at a very high speed.

4. TuneClone V1.20 supports converting protected music for playback on all kinds of MP3 players like Zune, PSP, BlackBerry, Creative Zen, iriver, Walkman, etc.

5. TuneClone V1.20 enables you to virtually burn music files with iTunes, Windows Media Player, RealPlayer, WinAMP and so on.

6. TuneClone V1.20 is specially designed for batch converting large song collections.

7. TuneClone V1.20 well preserves ID3 tags for artist, album, title names, artworks, etc.

8. With TuneClone V1.20, the converted songs will have no DRM restriction any more.

Availability

More information about TuneClone V1.20 is available at http://www.tuneclone.com/ . You can free download TuneClone V1.20 via http://www.tuneclone.com/tuneclone_setup.exe for a try. The full version of TuneClone V1.20 costs USD 34.95. If you have questions about or show interest in TuneClone V1.20, please feel free to contact its support team via support@tuneclone.com .
Categories: Audio converter, Convert m4p, Free download, Itunes to mp3, M4p converter, M4P to MP3, Tuneclone

[Add comment to QAIX.com] [Start blog at QAIX.com]

How to convert iTunes M4P to PSP

no@spam.com (terry007) — Tue, 19 Aug 2008 05:46:26 GMT

It is no doubt PSP is a great game player. But it is also a very good entertainment device which can be used for playing music. Assume you have some songs on your iTunes and are trying to figure out how to put them on your PSP. You copy and paste them in the PSP music folder, however, the PSP doesn't recognize the songs as music at all. So what's wrong? Don't worry! This guide will help you out of the trouble.

The music downloaded from iTunes is under DRM protection. In order to play it on your PSP, you need to strip the DRM off and have the iTunes M4P M4A converted to PSP MP3 format. You can burn the protected M4P music files to CD-R or CD-RW disc to make an audio CD and then use some CD ripper software to convert the audio CD track back to PSP MP3. Also iTunes allows you to burn the protected music files to CD-R or CD-RW disc to make a standard audio CD:

1. Insert a CD-R or CD-RW disc into your CD-ROM drive. You'd better use CD-RW disc as it can be used for more than once.
2. Create a new playlist in iTunes. Add the protected songs to your playlist until you have 72 minutes of music. Click Edit and select Preferences. Select the Advanced tab. Tick the Audio CD option on the Burning tab. Click the Burn Disc button to make an audio CD.
Note: You cannot select the MP3 CD option since it requires the protected music files be converted to unprotected MP3 files.
3. After the audio CD is successfully burned, insert the disc into your CD-ROM drive again. Then you can use iTunes or Windows Media Player to import the music tracks on the burned disc to MP3 files.

Sounds a good idea! But it would be a time consuming process if you have a library of iTunes M4P music files ready to be converted to PSP MP3 for playback on your PSP. And it is a waste of CD discs. Moreover, the information about the M4P music files like title, artist and album will be lost after burning and ripping back to MP3 or WMA files. So this method is not recommended if you have a big collection of iTunes M4P music files ready to be transferred to your PSP.

Here, I would recommend using TuneClone M4P to MP3 Converter(http://www.tuneclone.com ) to convert iTunes M4P to PSP MP3. It applys the virtual CD burning technology to simulates the burning and ripping process. You just need to burn the iTunes M4P playlist to TuneClone virtual CD burner. Then TuneClone will directly convert the iTunes M4P music list to PSP MP3 for you. It is very fast and the information about each music song will be preserved perfectly. You can follow its the step by step tutorial(http://itunesm4ptomp3.wordpress.com/2008/07/04/how-to-convert-itunes-m4p-to-mp3-with-tuneclone/ ) to learn how to convert iTunes DRM protected M4P music to PSP MP3.

After getting the output MP3 files by adopting either the burn-and-rip method or the way of using TuneClone M4P to MP3 Converter, now you can begin to transfer the MP3 files to your PSP:

1) Connect the PSP to your PC with a USB cable.
2) Press the "home" button on the PSP (it's a tiny button to the lower left of the screen) then use the left-right directional buttons to find "Settings", then the up-down buttons to find "USB Connection" on the PSP.
3) Press the "X" button (you got it, the round button with the "X" on it) and your PSP should display "USB Connection".
4) In a moment or two your computer should tell you that a new USB device has been connected, then show you a new generic hard drive, usually E: or F:
5) Click on the drive letter that corresponds to the PSP unit.
6) Now create a new folder on that drive and name it "psp".
7) Within the new "psp" folder create another folder, and name it "music".
8) Copy your desired mp3 files into the new "music" folder.
9) When you're done copying your desired music tracks, press the "O" button on the PSP to get out of USB connect mode.

Now you're ready to go! Use the left-right arrows to move to the music area, then the up-down arrows to find "Memory Stick". Choose that folder by pressing the "X" button again, and you should be able to find all your favorite music!

[Add comment to QAIX.com] [Start blog at QAIX.com]